ICOM IC-F9521 Series UHF P25 Conventional & Trunked Mobile Radios

ICOM

Call for Pricing

SKU:
ICOM F9521
Brand: ICOM
Condition:
New
Manufacturer Part #:
F9521
Frequency coverage:
400-470, 450-512 MHz
Number of channels:
Max. 512 channels/ 128 zones
Power supply requirement:
13.6V DC nominal
Current drain (approx.):
Tx High (50W) 11..0A/14.0A (VHF/UHF)
Rx:
Max. Audio 1000mA
Current drain (approx.):
Stand-by 350mA
Operating temperature range:
–30°C to +60°C; –22°F to +140°F
Antenna impedance:
50Ω (SO-239)
Dimensions (W×H×D):
175×45×170mm;
Weight:
1.5kg; 3.3lb
Rated output power:
50W
Channel spacing:
12.5 kHz
Audio output power:
4W typical at 10% distortion with a 4Ω load
Max. frequency deviation:
±5.0/2.5 kHz (Wide/Narrow)
Maximum pattern:
±2.85 kHz (Digital)
Minimum pattern:
±0.95 kHz (Digital)
Frequency error:
±1.0ppm
Spurious emissions:
70dB min.
Adjacent channel power:
0/60dB min (wide/Narrow) 67dB min. (Digital)
FM hum and noise:
48/43dB typ.
Audio harmonic distortion:
3% typ. (40% deviation)
External microphone impedance:
600Ω (8-pin modular)
Sensitivity Analog:
0.25μV typ. (at 12dB SINAD) 0.25μV typ. (at 5% BER)
Squelch sensitivity:
0.25μV typ. (at threshold)
Adjacent Ch. selectivity:
79/53dB typ. (UHF, Wide/Narrow)
(TIA/EIA603):
63dB typ
Spurious response:
70dB* min.
Intermodulation:
78dB typ.
Audio output power:
4W typ.
External audio (D-sub):
22W typ. at 10% distortion with a 4Ω load
Hum and noise ratio:
30/45dB typ. (UHF, Wide/Narrow)
External speaker connector:
2-conductor 3.5 (d) mm (1⁄8″)/4Ω

Call for Pricing

Please choose options for all selected products

Product Description

ICOM IC-F9521 Series UHF P25 Conventional & Trunked Mobile Radios

The IC-F9521 Series transceivers is a project 25 CAP compliant. It is a conventional and trunked transceiver with ample channel space of up to 512 channel stored in 128 memory zones. This allows an easy communication group and channel management.

The P25 helps you to observe and receive analog FM as well as P25 digital mode. It also makes it enhanced vocoder ready, OTAR over-the-air-rekeying and compatible with other branded P25 device. The radio features integral CTCSS and DTCS encoder, decoder signaling which helps to set selective call, group talks, and silent stand-by while other are talking.

This smart radio features a versatile, high contrast LCD with programmable settings and detachable front panel. It provides easy access and simple installation of the radio. It comes complete with a dynamic heavy-duty mic, HM-148, separation cord, optional remote control kit, RMK-2. It is built with a sturdy, shock-proof front controller panel ensuring its long life.

Features:

  • Project 25 CAP compliant
  • Conventional and trunked transceiver
  • Enhanced vocoder ready
  • 512 channel stored in 128 memory zones
  • Integral CTCSS and DTCS encoder, decoder signaling
  • High contrast LCD
  • Detachable front panel made from rugged and shock-proof material
  • Radio stun, kill function
  • ACC connector for compatible external devices
  • Public address and receiver speaker function
  • Tactical group function
  • Ample scanning functions
  • Wide frequency coverage: 136 - 173 MHz
  • FM wide/narrow channel spacing only for analog
  • Heavy duty, dynamic microphone HM-148 
  • NTIA VHF specification complaint 
  • Talk around function 
  • Microphone hanger action
  • 2-Tone encoder and decoder and MDC 1200 compatible only for analog
Included with IC-F9521 trunking mobile
  • Microphone (HM-148G)
  • Mounting bracket
  • Power cable
  • Owner’s manual
  • Warranty: 3 years

Other Details

Frequency coverage 400-470, 450-512 MHz
Number of channels Max. 512 channels/ 128 zones
Power supply requirement 13.6V DC nominal
Current drain (approx.) Tx High (50W) 11..0A/14.0A (VHF/UHF)
Rx Max. Audio 1000mA
Current drain (approx.) Stand-by 350mA
Operating temperature range –30°C to +60°C; –22°F to +140°F
Antenna impedance 50Ω (SO-239)
Dimensions (W×H×D) 175×45×170mm;
Weight 1.5kg; 3.3lb
Rated output power 50W
Channel spacing 12.5 kHz
Audio output power 4W typical at 10% distortion with a 4Ω load
Max. frequency deviation ±5.0/2.5 kHz (Wide/Narrow)
Maximum pattern ±2.85 kHz (Digital)
Minimum pattern ±0.95 kHz (Digital)
Frequency error ±1.0ppm
Spurious emissions 70dB min.
Adjacent channel power 0/60dB min (wide/Narrow) 67dB min. (Digital)
FM hum and noise 48/43dB typ.
Audio harmonic distortion 3% typ. (40% deviation)
External microphone impedance 600Ω (8-pin modular)
Sensitivity Analog 0.25μV typ. (at 12dB SINAD) 0.25μV typ. (at 5% BER)
Squelch sensitivity 0.25μV typ. (at threshold)
Adjacent Ch. selectivity 79/53dB typ. (UHF, Wide/Narrow)
(TIA/EIA603) 63dB typ
Spurious response 70dB* min.
Intermodulation 78dB typ.
Audio output power 4W typ.
External audio (D-sub) 22W typ. at 10% distortion with a 4Ω load
Hum and noise ratio 30/45dB typ. (UHF, Wide/Narrow)
External speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/4Ω