Ritron RQT-452-RCVR QuickTalk UHF Voice Alert Radio w/ Receiver

The Ritron RCVR is an industrial-grade, radio transmitter with external sensor input and voice storage capability, plus the added feature of an installed special purpose 433MHz receiver. It is compatible with virtually any other business-band 2-way radio, the radio can even be programmed to operate with radio repeaters. Free Custom Programming included!

RQT-452-RCVR includes RPS-EXPO external power supply

60201123 record cable for uploading audio available  (not included)

Features:

• 2 watt UHF (450-470 MHz)
• 4 Channels
• 4 inputs
• PC programmable with software
• Built in microphone to record voice messages
• Connect up to 4 switch or sensor inputs
• Inputs can be different frequency and tone code
• Recorded voice message for each switch

RCVR Voice Alerting Transmitter

The installed 433MHz receiver allows the use of accessory transmitter devices such as the small battery powered wireless call button (RQA-1B) or the ultra small, battery powered KeyFOB transmitter (RQT-KEYFOB-1). Accessory Transmitter devices are used to trigger voice messages to be sent from RQT-RCVR to other VHF or UHF radios operating on the same frequency.

Sample Alert messages that can be programmed:

"Temperature High on Tank 2"

"High Temp in Refrigerator"

"Power Failure in Server Closet"

"Back Door Open"

"Moisture Detected in lower level"

Or any custom message you need.

Connect virtually any type of switch or sensor (up to 4) to the RQT switch input(s), and record a unique voice message for each of the 4 switches. When any of the switches change state your pre-recorded voice message will instantly be transmitted to all radio-equipped personnel. Each input can be programmed to transmit on a different frequency. For extended range use the optional RAM-1545 antenna. The RQT radio even works with radio repeaters.

Monitor virtually any process or condition 24/7/365 over your 2-way radio system. Wireless alerting empowers your staff to respond to emergencies more quickly, to prevent costly damage or reduce disruptive downtime. Monitor temperature, liquid level, power-fail, moisture, vandal/tamper alarm, panic alarm, door ajar…etc.

The RQT is an industrial-grade, radio transmitter with on-board switch inputs and recordable voice messages. Connect up to 4 different sensors or switches to the RQT and record a corresponding voice message for each, when the sensor or switch detects a change, your custom voice message will be immediately transmitted to the appropriate radio-equipped personnel.

Includes:

• RQT-452-RCVR
• RPS-EXPO external power adapter
• AFB-1545 whip antenna