HITECH WIRELESS
Product Description
HiTech Wireless RG213 30 ft 50-Ohm Coaxial Cable – PL-259 Male to Male
The HiTech Wireless RG213-UHF-30 is a preassembled 30 ft, 50-ohm RG213 coaxial antenna cable with PL-259 (UHF male) connectors on both ends. It connects compatible radios, antennas, and RF accessories with SO-239 (UHF female) jacks.
Key Features
- RG-213, 50-ohm coax for compatible amateur radio, base station, and two-way radio antenna systems.
- PL-259 connectors at both ends screw directly onto matching SO-239 ports.
- Preassembled cable avoids installing connectors in the field.
Specifications
| Specification | Value |
|---|---|
| Cable type | RG-213 coaxial cable |
| Nominal impedance | 50 ohms |
| Connector at each end | PL-259 (UHF male) |
| Cable length | 30 ft |
Compatibility and Applications
- Amateur radio. The connectors mate with the SO-239 antenna ports on the Icom IC-7100 transceiver. Use the antenna port that matches your operating band.
- Base station antennas. The cable mates with the UHF-female jack on the Pulse Larsen BSA450C 450–470 MHz base station antenna. Match the antenna to your operating frequency.
Why Choose This Cable?
Choose this assembly when both ends of your antenna run call for PL-259. Matching the connectors lets you make the run without adding adapters at either end.
Package Includes
- One 30 ft RG213 50-ohm coaxial antenna cable with a PL-259 male connector on each end.
Installation Notes
Check both equipment ports before ordering and allow room for the preinstalled connectors when routing through conduit or wall openings. For outdoor installations, confirm that the cable jacket suits the site and weather-seal exposed connections.
Frequently Asked Questions
Does this RG213 cable fit an N-type female port?
PL-259 connects directly to an SO-239 jack. If both ports on your installation are N-type female, see the HiTech Wireless LM400 N-male to N-male cable.
What does UHF male mean on this cable?
UHF male is the connector name for a PL-259 plug. Check that your equipment has a matching SO-239 jack and confirm that the cable assembly is suitable for your operating frequency and power.
How do I choose the right cable length?
Measure the full route, including vertical runs and bends, and allow slack to make and service each connection. Cable loss increases with length, so use the shortest length that covers the route.