HITECH WIRELESS
Product Description
HiTech Wireless LM400 Low-Loss Coaxial Cable – N Male to N Male
The HiTech Wireless LM400 is a preassembled 50-ohm coaxial antenna cable with N-type male connectors on both ends. Use it as an RF feed line between compatible antennas and two-way radios, base stations, or repeater equipment. Choose the length you need using the Cable Length selector.
Key Features
- Selectable cable lengths let you match the feed line to the installation route.
- 50-ohm low-loss coax for compatible antenna and radio systems.
- N-type male connectors on both ends mate with N-type female ports.
- Preassembled cable saves the work of installing connectors in the field.
Specifications
| Specification | Value |
|---|---|
| Cable type | LM400 low-loss coaxial cable |
| Cable length | Choose from the Cable Length selector |
| Impedance | 50 ohms |
| Connectors | N-type male to N-type male |
Compatibility and Applications
- UHF base station and repeater antenna systems. This cable mates with the N-female connector on the Laird FG4500 450–470 MHz base station antenna and the N-female ports on the UHF Compact Duplexer. Select equipment that covers your operating frequencies.
- Motorola MOTOTRBO SLR5700-UD. The cable mates with the N-female transmit port on the SLR5700-UD repeater. The BNC-female receive port requires a BNC-male termination or a suitable adapter.
- Other fixed RF installations. Use it with amateur radio and point-to-point antenna systems when the connectors, impedance, operating frequency, and power requirements match.
Why Choose This Cable?
A preassembled feed line simplifies installation when both ends of the run call for N male. Choosing a length that fits the route helps avoid unnecessary cable loss and excess cable at the equipment.
Package Includes
- One LM400 50-ohm coaxial cable in the selected length, with an N-type male connector on each end.
Important Installation Notes
Check the connector type and gender at both ends before ordering. Allow clearance for the preinstalled connectors when routing through conduit or wall openings, and follow the bend radius specified for your assembly. For exposed installations, confirm that the cable jacket suits the site and weather-seal exposed connections.
Frequently Asked Questions
How do I choose the right cable length?
Measure the full route from the equipment port to the antenna, including vertical runs and bends. Allow enough slack for making and servicing the connections, then choose the shortest available length that covers the route.
Does this LM400 cable have PL-259 connectors?
It comes with N-type male connectors at both ends. An SO-239 jack requires a suitable adapter or a cable with a PL-259 termination.
Will this cable work on VHF and UHF?
It can serve as a feed line for compatible 50-ohm VHF and UHF systems. Check the connector at each end and confirm the cable loss and power handling at your operating frequency. Cable loss varies with length and frequency.
How do I check whether this cable fits my equipment?
Identify the make, model, and exact RF port at each end of the run. For help checking the fit, contact HiTech Wireless with your equipment models and operating frequency.